Application and evaluation of kriging and cokriging methods on groundwater depth mapping

Groundwater and water resources management play a key role in conserving the sustainable conditions in arid and semi-arid regions. Applying some techniques that can reveal the critical and hot conditions of water resources seem necessary. In this study, kriging and cokriging methods were evaluated for mapping the groundwater depth across a plain in which has experienced different climatic conditions (dry, wet, and normal) and consequently high variations in groundwater depth in a 12 year led in maximum, minimum, and mean depths. During this period groundwater depth has considerable fluctuations. Results obtained from geostatistical analysis showed that groundwater depth varies spatially in different climatic conditions. Furthermore, the calculated RMSE showed that cokriging approach was more accurate than kriging in mapping the groundwater depth though there was not a distinct difference. As a whole, kriging underestimated the real groundwater depth for dry, wet, and normal conditions by 5.5, 2.2, and 5.3%, while cokriging underestimations were 3.3, 2, and 2.2%, respectively; which showed the unbiasedness in estimations. Results implied that in the study area farming and cultivation in dry conditions needs more attention due to higher variability in groundwater depth in short distances compared to the other climate conditions. It is believed that geostatistical approaches are reliable tools for water resources managers and water authorities to allocate groundwater resources in different environmental conditions.     

Laboratory waste minimization by recovery of silver as nano-silver colloidal dispersion from waste silver chloride

The use of cyclic experiments, where the product of one reaction becomes the starting material for the next experiment, was proposed as an effective protocol for waste minimization in an educational lab. A simple, cheap and pollution-free method was developed for recovering silver as nano-silver colloidal dispersion from waste silver chloride in the laboratories of the Faculty of Health, Safety and Environment. Silver nanoparticles of the size 5–18 nm were recovered in the presence of sodium borohydride as a reducing agent and polyvinylpyrrolidone as a stabilizer agent. The nano-silver particles were studied for their formation, structure, stability and size using UV–Vis spectroscopy, transmission electron microscopy and dynamic light scattering techniques. The antibacterial assays of nanoparticles showed satisfactory results for Escherichia coli ATCC25922, Staphylococcus aureus ATCC 29213, and Acinetobacter baumanii (Clinical isolate). A laboratory experiment was designed in which students synthesize yellow colloidal silver solution from chemical waste silver chloride and estimate particle size using visible spectroscopy.     

Characterization of Urea Encapsulated by Biodegradable Starch-PVA-Glycerol

The influence of the blending ratio of biodegradable starch/polyvinyl alcohol (PVA)/glycerol in encapsulating urea has been investigated. It is found that water absorption capacity increased approximately 135 % as the amounts of starch, PVA and glycerol in the composite film increase. Therefore, the swell ability of the composite film is increased and the urea is released from the composite film in the wet environment. The FTIR shows that the urea had been encapsulated successfully in the composite films. Moreover, the soil burial biodegradation results indicated that the biodegradability of the starch/PVA/glycerol/urea composite film strongly depended on the PVA proportion in the composite film matrix. The DSC results show that the higher the amount of PVA in the composite film, the less change of the melting enthalpy value. The crystalline region of PVA remains after biodegradation.     

PREDICTING EROSION AND DEPOSITION ON A STRIPMINED AND RECLAIMED AREA1

ABSTRACT A rill-interrill erosion model was applied to a mined and reclaimed area. Soil loss from the interrill areas was estimated by the Universal Soil Loss Equation (USLE). The model considers the fate and ultimate disposition of the sediment from interrill areas along with the fate and destination of soil materials detached by the rill flow. The net sediment loss was predicted by comparing, for a given flow, the amounts of eroded soil to rill transport capacity. When applied to a selected stripmined and reclaimed site the model displayed the location of contributing areas and the amount of erosion and deposition. The predicted areal distribution of erosion and deposition was compared to measured data. Agreement between the predicted and measured values was within 25 percent.     

URBAN STORMWATER QUANTITY/QUALITY MODELING USING THE SCS METHOD AND EMPIRICAL EQUATIONS1

ABSTRACT: Runoff depth and pollutant loading (Biological Oxygen Demand [BOD₅], Total Suspended Solids [TSS], Total Kjeldahl Nitrogen [TKN] and lead [Pb]) computations of urban stormwater runoff from four small sites (i.e., 14.7–58.3 ac) in South Florida were performed using the Soil Conservation Service (SCS) hydrology method and empirical equations developed by the U.S. Environmental Protection Agency (EPA). Each site had different predominant land uses (i.e., low density residential, high density residential, highway and commercial). Quantity and quality data from 95 storm events at these sites were measured by the U.S. Geological Survey (USGS), and used for calibration of the methodology to derive appropriate input parameters. Calibrated input parameters were developed for each land use to test the applicability of the methodology in small sub-tropical urban watersheds, and to provide hydrologists with a way to select appropriate parameter values for planning studies. A total of 16 independent rainfall events were used for verification of the methodology. Comparisons of predicted versus measured data for both hydrographs and pollutant loadings were performed.     

Factors and values of willingness to pay for improved construction waste management--a perspective of Malaysian contractors

Malaysia is facing an increase in the generation of waste and of accompanying problems with the disposal of this waste. In the last two decades, extensive building and infrastructure development projects have led to an increase in the generation of construction waste material. The construction industry has a substantial impact on the environment, and its environmental effects are in direct relation to the quality and quantity of the waste it generates. This paper discusses general characteristics of the construction contractors, the contractors' willingness to pay (WTP) for improved construction waste management, determining factors which affect the amount of their willingness to pay, and suggestions and policy implications in the perspective of construction waste management in Malaysia. The data in this study is based on contractors registered with the construction industry development board (CIDB) of Malaysia. Employing the open ended contingent valuation method, the study assessed the contractors' average maximum WTP for improved construction waste management to be RM69.88 (1US$=3.6 RM) per tonne of waste. The result shows that the average maximum WTP is higher for large contractors than for medium and small contractors. The highest average maximum WTP value is RM88.00 for Group A (large contractors) RM78.25 for Group B (medium-size contractors) and RM55.80 for Group C (small contractors). One of the contributions of this study is to highlight the difference of CIDB registration grade in the WTP for improved construction waste management. It is found that contractors' WTP for improved waste collection and disposal services increases with the increase in contractors' current paid up capital. The identified factors and determinants of the WTP will assist the formulation of appropriate policies in addressing the construction waste problem in Malaysia and indirectly improve the quality of construction in the country.     

A prototype printer for laser driven micro-transfer printing

This paper demonstrates a new mode of automated micro transfer printing called laser micro transfer printing (LμTP). As a process, micro-transfer printing provides a unique and critical manufacturing route to extracting active microstructures from growth substrates and deterministically assembling them into a variety of functional substrates ranging from polymers to glasses and ceramics and to metallic foils to support applications such as flexible, large-area electronics, concentrating photovoltaics and displays. Laser transfer printing extends micro-transfer printing technology by providing a non-contact approach that is insensitive to the preparation and properties of the receiving substrate. It does so by exploiting the difference in the thermo-mechanical responses of the microstructure and transfer printing stamp materials to drive the release of the microstructure or ‘ink’ from the stamp and its transfer to substrate. This paper describes the process and the physical phenomena that drive it. It focuses on the use of this knowledge to design and test a print head for the process. The print head is used to demonstrate the new printing capabilities that LμTP enables.     

Developing a master plan for hospital solid waste management: a case study

Disposal of about 1750tons of solid wastes per day is the result of a rapid population growth in the province of Khuzestan in the south west of Iran. Most of these wastes, especially hospital solid wastes which have contributed to the pollution of the environment in the study area, are not properly managed considering environmental standards and regulations. In this paper, the framework of a master plan for managing hospital solid wastes is proposed considering different criteria which are usually used for evaluating the pollution of hospital solid waste loads. The effectiveness of the management schemes is also evaluated. In order to rank the hospitals and determine the share of each hospital in the total hospital solid waste pollution load, a multiple criteria decision making technique, namely analytical hierarchy process (AHP), is used. A set of projects are proposed for solid waste pollution control and reduction in the proposed framework. It is partially applied for hospital solid waste management in the province of Khuzestan, Iran. The results have shown that the hospitals located near the capital city of the province, Ahvaz, produce more than 43% of the total hospital solid waste pollution load of the province. The results have also shown the importance of improving management techniques rather than building new facilities. The proposed methodology is used to formulate a master plan for hospital solid waste management.     

In vitro reproduction of the turbellarian<Emphasis Type="Italic"> Urastoma cyprinae</Emphasis> isolated from<Emphasis Type="Italic"> Mytilus galloprovincialis</Emphasis>

Urastoma cyprinae is a species infecting the gills of several marine bivalves. Although there is some literature on this turbellarian, its life cycle remains unknown. In our work we have demonstrated that reproduction of U. cyprinae can be completed out of its host. More than 50% of turbellarians isolated from mussels (Mytilus galloprovincialis) secreted and cemented a cocoon to the well bottom during the first 72 h of incubation in seawater (34 salinity) at 14°C. Oviposition started at days 1–18 (average 4.8 days) and occurred in most cases inside the protective cocoon. Each Urastoma laid an average of 2.9 egg capsules (range 1–10) and 3.9 embryos were developed inside each egg capsule (range 1–11). Hatching started at days 20–43 (average 24 days). An average of 12.8 juvenile forms (range 1–64) escaped from the cocoon after hatching. The free-swimming juveniles showed a positive phototactic response and survived about a month after hatching. On the basis of our results, we propose a life cycle for U. cyprinae involving a sexual maturation parasitic period in the bivalve gills and a reproduction period including cocoon secretion, egg laying, and hatching that is entirely completed in the external environment.Communicated by S.A. Poulet, Roscoff     

Tourism and CO<Subscript>2</Subscript> emissions nexus in Southeast Asia: new evidence from panel estimation

The past decade has seen the rapid development of the tourist industry in Southeast Asia. There is increasing concern that tourism is highly affecting CO₂ emissions, but the nature of the relationship is still unclear. The main target of this paper is to investigate the existence of a linear and/or nonlinear relationship between tourism and CO₂ emissions in the five most important countries located in Southeast Asia, using the panel cointegration and pooled mean group techniques. The results indicate that tourism and CO₂ emissions are cointegrated, implying that tourism affects CO₂ emissions in the long run. Our findings support the nonlinear relationship between tourism and emissions as well as economic activities and CO₂ emissions. Accordingly, an inverted U-shaped relationship exists between tourism and emissions confirming the existence of an Environmental Kuznets Curve in the Southeast Asian tourism industry. Furthermore, the empirical results show that economic activities and energy consumption greatly increase emissions.